If the EMT pole has a hole in the end, as some do, thread a cable tie through the hole and the end of the pole, and then pull it to form a loose loop around the cord of the lights. It’s easiest with a buddy holding the lights up for you so you can work your way across the yard and attach the cable ties as you go. To do this, buy an 18-inch-long rebar stake for each EMT pole, position the poles where needed for support, drive half the stake into the ground with a hammer and slide the hollow EMT pole onto it.Ī simple, inexpensive way to attach the string lights to the EMT poles is with cable ties. If you’re installing lights over a lawn or anywhere else where you can drive a stake into the ground, an easier method is to use 10-foot-long electrical metal tubing poles, and secure each one into the ground with a metal rebar stake. Posts attached to a rooftop railing provide height and support for outdoor globe lights. If you’d like more tension in the string light cords, use a thicker wooden post (2-by-2 or larger), or use half-inch electrical metal tubing plus a tube clamp at the top for attaching a hook. If the lights are strung over a larger patio, they will have a substantial pull on the supports, which can cause buckets to tip over. The drawback of this method is that you need to deal with heavy planters or buckets filled with concrete. Position planters or buckets around the perimeter of a patio and string lights between the posts. If you don’t have any natural supports available in a yard, a common solution is to put posts, each with a hook on the top, into sturdy planters filled with gravel or buckets filled with concrete and a PVC pipe (large enough to fit the post) slot in the center. Secure the wooden posts to the fence posts by side-nailing (nailing at an angle), or use a drill to secure them with screws into the fence. Space the wooden posts along the fence posts, or roughly 8 feet apart. If you have a wood fence that isn’t high enough for the lights, attach 10-foot-long wooden posts with cup hooks on the top to bump up the height of the lights. If you don’t have walls or trees in just the right spot to hang your string lights, you’ll need to put a little extra effort into making supports for your patio lights.Īlong a wood fence. How to Hang String L ights in a Backyard Without Trees
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |